MikrofonSensor und TemperaturSenor die zwei Python programme funktionieren. mit den jeweiligen 2 json Datein. Beim TemperaturSensor wird im Terminal keine Wertre ausgegeben aber in der json Datei kann man die Temp und Hum sehen.

lib/python3.11/site-packages/pyftdi/doc/urlscheme.rst

@@ -0,0 +1,125 @@
+.. include:: defs.rst
+
+.. _url_scheme:
+
+URL Scheme
+----------
+
+There are two ways to open a connection to an `Ftdi` object.
+
+The recommended way to open a connection is to specify connection details
+using a URL. The URL scheme is defined as:
+
+::
+
+    ftdi://[vendor][:[product][:serial|:bus:address|:index]]/interface
+
+where:
+
+* vendor: the USB vendor ID of the manufacturer
+
+  * ex: ``ftdi`` or ``0x403``
+
+* product: the USB product ID of the device
+
+  * ex: ``232h`` or ``0x6014``
+  * Supported product IDs: ``0x6001``, ``0x6010``, ``0x6011``, ``0x6014``,
+    ``0x6015``
+  * Supported product aliases:
+
+    * ``232``, ``232r``, ``232h``, ``2232d``, ``2232h``, ``4232h``, ``4232ha``,
+      ``230x``
+    * ``ft`` prefix for all aliases is also accepted, as for example ``ft232h``
+
+* ``serial``: the serial number as a string. This is the preferred method to
+  uniquely identify a specific FTDI device. However, some FTDI device are not
+  fitted with an EEPROM, or the EEPROM is either corrupted or erased. In this
+  case, FTDI devices report no serial number
+
+  Examples:
+     * ``ftdi://ftdi:232h:FT0FMF6V/1``
+     * ``ftdi://:232h:FT0FMF6V/1``
+     * ``ftdi://::FT0FMF6V/1``
+
+* ``bus:addess``: it is possible to select a FTDI device through a bus:address
+  pair, specified as *hexadecimal* integer values.
+
+  Examples:
+     * ``ftdi://ftdi:232h:10:22/1``
+     * ``ftdi://ftdi:232h:10:22/1``
+     * ``ftdi://::10:22/1``
+
+  Here, bus ``(0x)10`` = 16 (decimal) and address ``(0x)22`` = 34 (decimal)
+
+* ``index``: an integer - not particularly useful, as it depends on the
+  enumeration order on the USB buses, and may vary from on session to another.
+
+* ``interface``: the interface of FTDI device, starting from 1
+
+  * ``1`` for 230x and 232\* devices,
+  * ``1`` or ``2`` for 2232\* devices,
+  * ``1``, ``2``, ``3`` or ``4`` for 4232\* devices
+
+All parameters but the interface are optional, PyFtdi tries to find the best
+match. Therefore, if you have a single FTDI device connected to your system,
+``ftdi:///1`` should be enough.
+
+You can also ask PyFtdi to enumerate all the compatible devices with the
+special ``ftdi:///?`` syntax. This syntax is useful to retrieve the available
+FTDI URLs with serial number and/or bus:address selectors. To avoid conflicts
+with some shells such as `zsh`, escape the `?` char as ``ftdi:///\?``.
+
+There are several APIs available to enumerate/filter available FTDI device.
+See :doc:`api/ftdi`.
+
+Note that opening an FTDI connection with a URL ending with `?` is interpreted
+as a query for matching FTDI devices and immediately stop. With this special
+URL syntax, the avaialble devices are printed out to the standard output, and
+the Python interpreter is forced to exit (`SystemExit` is raised).
+
+When simple enumeration of the available FTDI devices is needed - so that
+execution is not interrupted, two helper methods are available as
+:py:meth:`pyftdi.ftdi.Ftdi.list_devices` and
+:py:meth:`pyftdi.ftdi.Ftdi.show_devices` and accept the same URL syntax.
+
+Opening a connection
+~~~~~~~~~~~~~~~~~~~~
+
+URL-based methods to open a connection
+``````````````````````````````````````
+
+.. code-block:: python
+
+   open_from_url()
+   open_mpsse_from_url()
+   open_bitbang_from_url()
+
+
+Device-based methods to open a connection
+`````````````````````````````````````````
+
+You may also open an Ftdi device from an existing PyUSB_ device, with the help
+of the ``open_from_device()`` helper method.
+
+.. code-block:: python
+
+   open_from_device()
+   open_mpsse_from_device()
+   open_bitbang_from_device()
+
+
+Legacy methods to open a connection
+```````````````````````````````````
+
+The old, deprecated method to open a connection is to use the ``open()``
+methods without the ``_from_url`` suffix, which accept VID, PID, and serial
+parameters (among others).
+
+.. code-block:: python
+
+   open()
+   open_mpsse()
+   open_bitbang()
+
+See the :ref:`ftdi_urls` tool to obtain the URLs for the connected FTDI
+devices.