MikrofonSensor und TemperaturSenor die zwei Python programme funktionieren. mit den jeweiligen 2 json Datein. Beim TemperaturSensor wird im Terminal keine Wertre ausgegeben aber in der json Datei kann man die Temp und Hum sehen.

2025-05-28 14:53:44 +02:00 · 2025-05-28 14:53:44 +02:00 · 1751076592
commit 1751076592
parent 4c654ec969
2614 changed files with 349009 additions and 0 deletions
--- a/lib/python3.11/site-packages/pyftdi/doc/features.rst
+++ b/lib/python3.11/site-packages/pyftdi/doc/features.rst
@ -0,0 +1,98 @@
+.. include:: defs.rst
+
+Features
+--------
+
+Devices
+~~~~~~~
+
+* All FTDI device ports (UART, MPSSE) can be used simultaneously.
+
+  * SPI and |I2C| SPI support simultaneous GPIO R/W access for all pins that
+    are not used for SPI/|I2C| feature.
+
+* Several FTDI adapters can be accessed simultaneously from the same Python
+  runtime instance.
+
+Supported features
+~~~~~~~~~~~~~~~~~~
+
+UART
+````
+
+Serial port, up to 6 Mbps. PyFtdi_ includes a pyserial_ emulation layer that
+offers transparent access to the FTDI serial ports through a pyserial_-
+compliant API. The ``serialext`` directory contains a minimal serial terminal
+demonstrating the use of this extension, and a dispatcher automatically
+selecting the serial backend (pyserial_, PyFtdi_), based on the serial port
+name.
+
+See also :ref:`uart-limitations`.
+
+SPI master
+``````````
+
+Supported devices:
+
+=====  ===== ====== ============================================================
+Mode   CPol   CPha  Status
+=====  ===== ====== ============================================================
+  0      0      0   Supported on all MPSSE devices
+  1      0      1   Workaround available for on -H series
+  2      1      0   Supported on -H series (FT232H_/FT2232H_/FT4232H_/FT4232HA_)
+  3      1      1   Workaround available for on -H series
+=====  ===== ====== ============================================================
+
+PyFtdi_ can be used with pyspiflash_ module that demonstrates how to
+use the FTDI SPI master with a pure-Python serial flash device driver for
+several common devices.
+
+Both Half-duplex (write or read) and full-duplex (synchronous write and read)
+communication modes are supported.
+
+Experimental support for non-byte aligned access, where up to 7 trailing bits
+can be discarded: no clock pulse is generated for those bits, so that SPI
+transfer of non byte-sized can be performed.
+
+See :ref:`spi_wiring` and :ref:`spi_limitations`.
+
+Note: FTDI*232* devices cannot be used as an SPI slave.
+
+|I2C| master
+````````````
+
+Supported devices: FT232H_, FT2232H_, FT4232H_, FT4232HA_
+
+For now, only 7-bit addresses are supported.
+
+GPIOs can be used while |I2C| mode is enabled.
+
+The ``i2cscan.py`` script helps to discover which I2C devices are connected to
+the FTDI I2C bus. See the :ref:`tools` chapter to locate this tool.
+
+The pyi2cflash_ module demonstrates how to use the FTDI |I2C| master to access
+serial EEPROMS.
+
+See :ref:`i2c_wiring` and :ref:`i2c_limitations`.
+
+Note: FTDI*232* devices cannot be used as an |I2C| slave.
+
+JTAG
+````
+
+JTAG API is limited to low-level access. It is not intented to be used for
+any flashing or debugging purpose, but may be used as a base to perform SoC
+tests and boundary scans.
+
+EEPROM
+``````
+
+The ``pyftdi/bin/ftconf.py`` script helps to manage the content of the FTDI
+companion EEPROM.
+
+
+Status
+~~~~~~
+
+This project is still in beta development stage. PyFtdi_ is developed as an
+open-source solution.