MikrofonSensor und TemperaturSenor die zwei Python programme funktionieren. mit den jeweiligen 2 json Datein. Beim TemperaturSensor wird im Terminal keine Wertre ausgegeben aber in der json Datei kann man die Temp und Hum sehen.

lib/python3.11/site-packages/bitbangio.py

@@ -0,0 +1,128 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""
+`bitbangio` - Bitbanged bus protocols
+==============================================================
+
+See `CircuitPython:bitbangio` in CircuitPython for more details.
+
+* Author(s): cefn
+"""
+
+import adafruit_platformdetect.constants.boards as ap_board
+from adafruit_blinka import Lockable, agnostic
+
+# pylint: disable=import-outside-toplevel,too-many-arguments
+
+
+class I2C(Lockable):
+    """Bitbang/Software I2C implementation"""
+
+    def __init__(self, scl, sda, frequency=400000):
+        # TODO: This one is a bit questionable:
+        if agnostic.board_id == ap_board.PYBOARD:
+            raise NotImplementedError("No software I2C on {}".format(agnostic.board_id))
+        if agnostic.detector.board.any_embedded_linux:
+            # TODO: Attempt to load this library automatically
+            raise NotImplementedError(
+                "For bitbangio on Linux, please use Adafruit_CircuitPython_BitbangIO"
+            )
+        self.init(scl, sda, frequency)
+
+    def init(self, scl, sda, frequency):
+        """Initialization"""
+        from machine import Pin
+        from machine import I2C as _I2C
+
+        self.deinit()
+        id = (  # pylint: disable=redefined-builtin
+            -1
+        )  # force bitbanging implementation - in future
+        # introspect platform if SDA/SCL matches hardware I2C
+        self._i2c = _I2C(id, Pin(scl.id), Pin(sda.id), freq=frequency)
+
+    def deinit(self):
+        """Deinitialization"""
+        try:
+            del self._i2c
+        except AttributeError:
+            pass
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, exc_type, exc_value, traceback):
+        self.deinit()
+
+    def scan(self):
+        """Scan for attached devices"""
+        return self._i2c.scan()
+
+    def readfrom_into(self, address, buffer, start=0, end=None):
+        """Read from a device at specified address into a buffer"""
+        if start != 0 or end is not None:
+            if end is None:
+                end = len(buffer)
+            buffer = memoryview(buffer)[start:end]
+        stop = True  # remove for efficiency later
+        return self._i2c.readfrom_into(address, buffer, stop)
+
+    def writeto(self, address, buffer, start=0, end=None, stop=True):
+        """Write to a device at specified address from a buffer"""
+        if start != 0 or end is not None:
+            if end is None:
+                return self._i2c.writeto(address, memoryview(buffer)[start:], stop)
+            return self._i2c.writeto(address, memoryview(buffer)[start:end], stop)
+        return self._i2c.writeto(address, buffer, stop)
+
+
+# TODO untested, as actually busio.SPI was on
+# tasklist https://github.com/adafruit/Adafruit_Micropython_Blinka/issues/2 :(
+class SPI(Lockable):
+    """Bitbang/Software SPI implementation"""
+
+    def __init__(self, clock, MOSI=None, MISO=None):
+        if agnostic.detector.board.any_embedded_linux:
+            # TODO: Attempt to load this library automatically
+            raise NotImplementedError(
+                "For bitbangio on Linux, please use Adafruit_CircuitPython_BitbangIO"
+            )
+        from machine import SPI as _SPI
+
+        self._spi = _SPI(-1)
+        self._pins = (clock, MOSI, MISO)
+
+    def configure(self, baudrate=100000, polarity=0, phase=0, bits=8):
+        """Update the configuration"""
+        from machine import Pin
+        from machine import SPI as _SPI
+
+        if self._locked:
+            # TODO verify if _spi obj 'caches' sck, mosi, miso to
+            # avoid storing in _attributeIds (duplicated in busio)
+            # i.e. #init ignores MOSI=None rather than unsetting
+            self._spi.init(
+                baudrate=baudrate,
+                polarity=polarity,
+                phase=phase,
+                bits=bits,
+                firstbit=_SPI.MSB,
+                sck=Pin(self._pins[0].id),
+                mosi=Pin(self._pins[1].id),
+                miso=Pin(self._pins[2].id),
+            )
+        else:
+            raise RuntimeError("First call try_lock()")
+
+    def write(self, buf):
+        """Write to the SPI device"""
+        return self._spi.write(buf)
+
+    def readinto(self, buf):
+        """Read from the SPI device into a buffer"""
+        return self.readinto(buf)
+
+    def write_readinto(self, buffer_out, buffer_in):
+        """Write to the SPI device and read from the SPI device into a buffer"""
+        return self.write_readinto(buffer_out, buffer_in)