MikrofonSensor und TemperaturSenor die zwei Python programme funktionieren. mit den jeweiligen 2 json Datein. Beim TemperaturSensor wird im Terminal keine Wertre ausgegeben aber in der json Datei kann man die Temp und Hum sehen.

lib/python3.11/site-packages/adafruit_bus_device/spi_device.py

@@ -0,0 +1,117 @@
+# SPDX-FileCopyrightText: 2016 Scott Shawcroft for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
+"""
+`adafruit_bus_device.spi_device` - SPI Bus Device
+====================================================
+"""
+
+import time
+
+try:
+    from types import TracebackType
+    from typing import Optional, Type
+
+    # Used only for type annotations.
+    from busio import SPI
+    from digitalio import DigitalInOut
+except ImportError:
+    pass
+
+
+__version__ = "5.2.12"
+__repo__ = "https://github.com/adafruit/Adafruit_CircuitPython_BusDevice.git"
+
+
+class SPIDevice:
+    """
+    Represents a single SPI device and manages locking the bus and the device
+    address.
+
+    :param ~busio.SPI spi: The SPI bus the device is on
+    :param ~digitalio.DigitalInOut chip_select: The chip select pin object that implements the
+        DigitalInOut API.
+    :param bool cs_active_value: Set to True if your device requires CS to be active high.
+        Defaults to False.
+    :param int baudrate: The desired SCK clock rate in Hertz. The actual clock rate may be
+        higher or lower due to the granularity of available clock settings (MCU dependent).
+    :param int polarity: The base state of the SCK clock pin (0 or 1).
+    :param int phase: The edge of the clock that data is captured. First (0) or second (1).
+        Rising or falling depends on SCK clock polarity.
+    :param int extra_clocks: The minimum number of clock cycles to cycle the bus after CS is high.
+        (Used for SD cards.)
+
+    .. note:: This class is **NOT** built into CircuitPython. See
+      :ref:`here for install instructions <bus_device_installation>`.
+
+    Example:
+
+    .. code-block:: python
+
+        import busio
+        import digitalio
+        from board import *
+        from adafruit_bus_device.spi_device import SPIDevice
+
+        with busio.SPI(SCK, MOSI, MISO) as spi_bus:
+            cs = digitalio.DigitalInOut(D10)
+            device = SPIDevice(spi_bus, cs)
+            bytes_read = bytearray(4)
+            # The object assigned to spi in the with statements below
+            # is the original spi_bus object. We are using the busio.SPI
+            # operations busio.SPI.readinto() and busio.SPI.write().
+            with device as spi:
+                spi.readinto(bytes_read)
+            # A second transaction
+            with device as spi:
+                spi.write(bytes_read)
+    """
+
+    def __init__(
+        self,
+        spi: SPI,
+        chip_select: Optional[DigitalInOut] = None,
+        *,
+        cs_active_value: bool = False,
+        baudrate: int = 100000,
+        polarity: int = 0,
+        phase: int = 0,
+        extra_clocks: int = 0,
+    ) -> None:
+        self.spi = spi
+        self.baudrate = baudrate
+        self.polarity = polarity
+        self.phase = phase
+        self.extra_clocks = extra_clocks
+        self.chip_select = chip_select
+        self.cs_active_value = cs_active_value
+        if self.chip_select:
+            self.chip_select.switch_to_output(value=not self.cs_active_value)
+
+    def __enter__(self) -> SPI:
+        while not self.spi.try_lock():
+            time.sleep(0)
+        self.spi.configure(baudrate=self.baudrate, polarity=self.polarity, phase=self.phase)
+        if self.chip_select:
+            self.chip_select.value = self.cs_active_value
+        return self.spi
+
+    def __exit__(
+        self,
+        exc_type: Optional[Type[type]],
+        exc_val: Optional[BaseException],
+        exc_tb: Optional[TracebackType],
+    ) -> bool:
+        if self.chip_select:
+            self.chip_select.value = not self.cs_active_value
+        if self.extra_clocks > 0:
+            buf = bytearray(1)
+            buf[0] = 0xFF
+            clocks = self.extra_clocks // 8
+            if self.extra_clocks % 8 != 0:
+                clocks += 1
+            for _ in range(clocks):
+                self.spi.write(buf)
+        self.spi.unlock()
+        return False