MikrofonSensor und TemperaturSenor die zwei Python programme funktionieren. mit den jeweiligen 2 json Datein. Beim TemperaturSensor wird im Terminal keine Wertre ausgegeben aber in der json Datei kann man die Temp und Hum sehen.

lib/python3.11/site-packages/adafruit_blinka/microcontroller/tegra/PWMOut.py

@@ -0,0 +1,159 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Custom PWMOut Wrapper for Jetson GPIO PWM Class"""
+from RPi import GPIO
+
+GPIO.setmode(GPIO.TEGRA_SOC)  # Use BCM pins D4 = GPIO #4
+GPIO.setwarnings(True)  # shh!
+
+
+class PWMError(IOError):
+    """Base class for PWM errors."""
+
+
+class PWMOut:
+    """Pulse Width Modulation Output Class"""
+
+    def __init__(self, pin, *, frequency=500, duty_cycle=0, variable_frequency=False):
+        self._pwmpin = None
+        self._period = 0
+        self._open(pin, duty_cycle, frequency, variable_frequency)
+
+    def __del__(self):
+        self.deinit()
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, t, value, traceback):
+        self.deinit()
+
+    def _open(self, pin, duty=0, freq=500, variable_frequency=False):
+        self._pin = pin
+        GPIO.setup(pin.id, GPIO.OUT, initial=GPIO.HIGH)
+        self._pwmpin = GPIO.PWM(pin.id, freq)
+
+        if variable_frequency:
+            print("Variable Frequency is not supported, continuing without it...")
+
+        # set frequency
+        self.frequency = freq
+        # set duty
+        self.duty_cycle = duty
+
+        self.enabled = True
+
+    def deinit(self):
+        """Deinit the PWM."""
+        if self._pwmpin is not None:
+            self._pwmpin.stop()
+            GPIO.cleanup(self._pin.id)
+            self._pwmpin = None
+
+    def _is_deinited(self):
+        if self._pwmpin is None:
+            raise ValueError(
+                "Object has been deinitialize and can no longer "
+                "be used. Create a new object."
+            )
+
+    @property
+    def period(self):
+        """Get or set the PWM's output period in seconds.
+
+        Raises:
+            PWMError: if an I/O or OS error occurs.
+            TypeError: if value type is not int or float.
+
+        :type: int, float
+        """
+        return 1.0 / self.frequency
+
+    @period.setter
+    def period(self, period):
+        if not isinstance(period, (int, float)):
+            raise TypeError("Invalid period type, should be int or float.")
+
+        self.frequency = 1.0 / period
+
+    @property
+    def duty_cycle(self):
+        """Get or set the PWM's output duty cycle which is the fraction of
+        each pulse which is high. 16-bit
+
+        Raises:
+            PWMError: if an I/O or OS error occurs.
+            TypeError: if value type is not int or float.
+            ValueError: if value is out of bounds of 0.0 to 1.0.
+
+        :type: int, float
+        """
+        return int(self._duty_cycle * 65535)
+
+    @duty_cycle.setter
+    def duty_cycle(self, duty_cycle):
+        if not isinstance(duty_cycle, (int, float)):
+            raise TypeError("Invalid duty cycle type, should be int or float.")
+
+        if not 0 <= duty_cycle <= 65535:
+            raise ValueError("Invalid duty cycle value, should be between 0 and 65535")
+
+        # convert from 16-bit
+        duty_cycle /= 65535.0
+
+        self._duty_cycle = duty_cycle
+        self._pwmpin.ChangeDutyCycle(round(self._duty_cycle * 100))
+
+    @property
+    def frequency(self):
+        """Get or set the PWM's output frequency in Hertz.
+
+        Raises:
+            PWMError: if an I/O or OS error occurs.
+            TypeError: if value type is not int or float.
+
+        :type: int, float
+        """
+
+        return self._frequency
+
+    @frequency.setter
+    def frequency(self, frequency):
+        if not isinstance(frequency, (int, float)):
+            raise TypeError("Invalid frequency type, should be int or float.")
+
+        self._pwmpin.ChangeFrequency(round(frequency))
+        self._frequency = frequency
+
+    @property
+    def enabled(self):
+        """Get or set the PWM's output enabled state.
+
+        Raises:
+            PWMError: if an I/O or OS error occurs.
+            TypeError: if value type is not bool.
+
+        :type: bool
+        """
+        return self._enabled
+
+    @enabled.setter
+    def enabled(self, value):
+        if not isinstance(value, bool):
+            raise TypeError("Invalid enabled type, should be string.")
+
+        if value:
+            self._pwmpin.start(round(self._duty_cycle * 100))
+        else:
+            self._pwmpin.stop()
+
+        self._enabled = value
+
+    # String representation
+    def __str__(self):
+        return "pin %s (freq=%f Hz, duty_cycle=%f%%)" % (
+            self._pin,
+            self.frequency,
+            self.duty_cycle,
+        )

lib/python3.11/site-packages/adafruit_blinka/microcontroller/tegra/t186/pin.py

@@ -0,0 +1,138 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Tegra T186 pin names"""
+
+import atexit
+from Jetson import GPIO
+
+GPIO.setmode(GPIO.TEGRA_SOC)
+GPIO.setwarnings(False)  # shh!
+
+
+class Pin:
+    """Pins dont exist in CPython so...lets make our own!"""
+
+    IN = 0
+    OUT = 1
+    LOW = 0
+    HIGH = 1
+    PULL_NONE = 0
+    PULL_UP = 1
+    PULL_DOWN = 2
+
+    id = None
+    _value = LOW
+    _mode = IN
+
+    def __init__(self, bcm_number):
+        self.id = bcm_number
+
+    def __repr__(self):
+        return str(self.id)
+
+    def __eq__(self, other):
+        return self.id == other
+
+    def init(self, mode=IN, pull=None):
+        """Initialize the Pin"""
+        if mode is not None:
+            if mode == self.IN:
+                self._mode = self.IN
+                GPIO.setup(self.id, GPIO.IN)
+            elif mode == self.OUT:
+                self._mode = self.OUT
+                GPIO.setup(self.id, GPIO.OUT)
+            else:
+                raise RuntimeError("Invalid mode for pin: %s" % self.id)
+        if pull is not None:
+            if self._mode != self.IN:
+                raise RuntimeError("Cannot set pull resistor on output")
+            if pull == self.PULL_UP:
+                GPIO.setup(self.id, GPIO.IN, pull_up_down=GPIO.PUD_UP)
+            elif pull == self.PULL_DOWN:
+                GPIO.setup(self.id, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
+            else:
+                raise RuntimeError("Invalid pull for pin: %s" % self.id)
+
+    def value(self, val=None):
+        """Set or return the Pin Value"""
+        if val is not None:
+            if val == self.LOW:
+                self._value = val
+                GPIO.output(self.id, val)
+                return None
+            if val == self.HIGH:
+                self._value = val
+                GPIO.output(self.id, val)
+                return None
+            raise RuntimeError("Invalid value for pin")
+        return GPIO.input(self.id)
+
+    # pylint: disable=no-method-argument
+    @atexit.register
+    def cleanup():
+        """Clean up pins"""
+        print("Exiting... \nCleaning up pins")
+        GPIO.cleanup()
+
+    # pylint: enable=no-method-argument
+
+
+# Cannot be used as GPIO
+SDA = Pin("GPIO_SEN9")
+SCL = Pin("GPIO_SEN8")
+SDA_1 = Pin("GEN1_I2C_SDA")
+SCL_1 = Pin("GEN1_I2C_SCL")
+
+# Jetson TX2 specific
+J06 = Pin("GPIO_AUD1")
+AA02 = Pin("CAN_GPIO2")
+N06 = Pin("GPIO_CAM7")
+N04 = Pin("GPIO_CAM5")
+N05 = Pin("GPIO_CAM6")
+N03 = Pin("GPIO_CAM4")
+AA01 = Pin("CAN_GPIO1")
+I05 = Pin("GPIO_PQ5")
+T03 = Pin("UART1_CTS")
+T02 = Pin("UART1_RTS")
+P17 = Pin("GPIO_EXP_P17")
+AA00 = Pin("CAN_GPIO0")
+Y01 = Pin("GPIO_MDM2")
+P16 = Pin("GPIO_EXP_P16")
+I04 = Pin("GPIO_PQ4")
+J05 = Pin("GPIO_AUD0")
+
+# Jetson TX2 NX specific
+W04 = Pin("UART3_RTS")
+V01 = Pin("GPIO_SEN1")
+C02 = Pin("DAP2_DOUT")
+C03 = Pin("DAP2_DIN")
+V04 = Pin("GPIO_SEN4")
+H02 = Pin("GPIO_WAN7")
+H01 = Pin("GPIO_WAN6")
+V02 = Pin("GPIO_SEN2")
+H00 = Pin("GPIO_WAN5")
+H03 = Pin("GPIO_WAN8")
+Y03 = Pin("GPIO_MDM4")
+N01 = Pin("GPIO_CAM2")
+EE02 = Pin("TOUCH_CLK")
+U00 = Pin("GPIO_DIS0")
+U05 = Pin("GPIO_DIS5")
+W05 = Pin("UART3_CTS")
+V03 = Pin("GPIO_SEN3")
+
+# Shared pin
+J03 = Pin("DAP1_FS")
+J02 = Pin("DAP1_DIN")
+J01 = Pin("DAP1_DOUT")
+J00 = Pin("DAP1_SCLK")
+J04 = Pin("AUD_MCLK")
+
+i2cPorts = (
+    (1, SCL, SDA),
+    (0, SCL_1, SDA_1),
+)
+
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = ((3, N03, N05, N04),)

lib/python3.11/site-packages/adafruit_blinka/microcontroller/tegra/t194/pin.py

@@ -0,0 +1,137 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Tegra T194 pin names"""
+import atexit
+from Jetson import GPIO
+
+GPIO.setmode(GPIO.TEGRA_SOC)
+GPIO.setwarnings(False)  # shh!
+
+
+class Pin:
+    """Pins dont exist in CPython so...lets make our own!"""
+
+    IN = 0
+    OUT = 1
+    LOW = 0
+    HIGH = 1
+    PULL_NONE = 0
+    PULL_UP = 1
+    PULL_DOWN = 2
+
+    id = None
+    _value = LOW
+    _mode = IN
+
+    def __init__(self, bcm_number):
+        self.id = bcm_number
+
+    def __repr__(self):
+        return str(self.id)
+
+    def __eq__(self, other):
+        return self.id == other
+
+    def init(self, mode=IN, pull=None):
+        """Initialize the Pin"""
+        if mode is not None:
+            if mode == self.IN:
+                self._mode = self.IN
+                GPIO.setup(self.id, GPIO.IN)
+            elif mode == self.OUT:
+                self._mode = self.OUT
+                GPIO.setup(self.id, GPIO.OUT)
+            else:
+                raise RuntimeError("Invalid mode for pin: %s" % self.id)
+        if pull is not None:
+            if self._mode != self.IN:
+                raise RuntimeError("Cannot set pull resistor on output")
+            if pull == self.PULL_UP:
+                GPIO.setup(self.id, GPIO.IN, pull_up_down=GPIO.PUD_UP)
+            elif pull == self.PULL_DOWN:
+                GPIO.setup(self.id, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
+            else:
+                raise RuntimeError("Invalid pull for pin: %s" % self.id)
+
+    def value(self, val=None):
+        """Set or return the Pin Value"""
+        if val is not None:
+            if val == self.LOW:
+                self._value = val
+                GPIO.output(self.id, val)
+                return None
+            if val == self.HIGH:
+                self._value = val
+                GPIO.output(self.id, val)
+                return None
+            raise RuntimeError("Invalid value for pin")
+        return GPIO.input(self.id)
+
+    # pylint: disable=no-method-argument
+    @atexit.register
+    def cleanup():
+        """Clean up pins"""
+        print("Exiting... \nCleaning up pins")
+        GPIO.cleanup()
+
+    # pylint: enable=no-method-argument
+
+
+# Cannot be used as GPIO
+SDA = Pin("DP_AUX_CH3_N")
+SCL = Pin("DP_AUX_CH3_P")
+SDA_1 = Pin("GEN2_I2C_SDA")
+SCL_1 = Pin("GEN2_I2C_SCL")
+
+# Jetson Xavier only
+Q06 = Pin("SOC_GPIO42")
+AA03 = Pin("CAN0_DIN")
+AA02 = Pin("CAN0_DOUT")
+BB01 = Pin("CAN1_EN")
+AA00 = Pin("CAN1_DOUT")
+H07 = Pin("DAP2_SCLK")
+I02 = Pin("DAP2_FS")
+I01 = Pin("DAP2_DIN")
+I00 = Pin("DAP2_DOUT")
+BB00 = Pin("CAN1_STB")
+H00 = Pin("SOC_GPIO12")
+Q01 = Pin("SOC_GPIO21")
+AA01 = Pin("CAN1_DIN")
+
+# Jetson NX only
+S04 = Pin("AUD_MCLK")
+T05 = Pin("DAP5_SCLK")
+Y00 = Pin("SPI3_SCK")
+CC04 = Pin("TOUCH_CLK")
+Y04 = Pin("SPI3_CS1_N")
+Y03 = Pin("SPI3_CS0_N")
+Y01 = Pin("SPI3_MISO")
+Q05 = Pin("SOC_GPIO41")
+Q06 = Pin("SOC_GPIO42")
+U00 = Pin("DAP5_FS")
+Y02 = Pin("SPI3_MOSI")
+T07 = Pin("DAP5_DIN")
+T06 = Pin("DAP5_DOUT")
+
+# Clara AGX Xavier only
+P04 = Pin("SOC_GPIO04")
+
+# Shared
+N01 = Pin("SOC_GPIO54")
+R00 = Pin("SOC_GPIO44")
+R04 = Pin("UART1_RTS")
+R05 = Pin("UART1_CTS")
+Z03 = Pin("SPI1_SCK")
+Z04 = Pin("SPI1_MISO")
+Z05 = Pin("SPI1_MOSI")
+Z06 = Pin("SPI1_CS0_N")
+Z07 = Pin("SPI1_CS1_N")
+
+i2cPorts = (
+    (8, SCL, SDA),
+    (1, SCL_1, SDA_1),
+)
+
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = ((0, Z03, Z05, Z04),)

lib/python3.11/site-packages/adafruit_blinka/microcontroller/tegra/t210/pin.py

@@ -0,0 +1,143 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Tegra T210 pin names"""
+
+import atexit
+from Jetson import GPIO
+
+GPIO.setmode(GPIO.TEGRA_SOC)
+GPIO.setwarnings(False)  # shh!
+
+
+class Pin:
+    """Pins dont exist in CPython so...lets make our own!"""
+
+    IN = 0
+    OUT = 1
+    LOW = 0
+    HIGH = 1
+    PULL_NONE = 0
+    PULL_UP = 1
+    PULL_DOWN = 2
+
+    id = None
+    _value = LOW
+    _mode = IN
+
+    def __init__(self, bcm_number):
+        self.id = bcm_number
+
+    def __repr__(self):
+        return str(self.id)
+
+    def __eq__(self, other):
+        return self.id == other
+
+    def init(self, mode=IN, pull=None):
+        """Initialize the Pin"""
+        if mode is not None:
+            if mode == self.IN:
+                self._mode = self.IN
+                GPIO.setup(self.id, GPIO.IN)
+            elif mode == self.OUT:
+                self._mode = self.OUT
+                GPIO.setup(self.id, GPIO.OUT)
+            else:
+                raise RuntimeError("Invalid mode for pin: %s" % self.id)
+        if pull is not None:
+            if self._mode != self.IN:
+                raise RuntimeError("Cannot set pull resistor on output")
+            if pull == self.PULL_UP:
+                GPIO.setup(self.id, GPIO.IN, pull_up_down=GPIO.PUD_UP)
+            elif pull == self.PULL_DOWN:
+                GPIO.setup(self.id, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
+            else:
+                raise RuntimeError("Invalid pull for pin: %s" % self.id)
+
+    def value(self, val=None):
+        """Set or return the Pin Value"""
+        if val is not None:
+            if val == self.LOW:
+                self._value = val
+                GPIO.output(self.id, val)
+                return None
+            if val == self.HIGH:
+                self._value = val
+                GPIO.output(self.id, val)
+                return None
+            raise RuntimeError("Invalid value for pin")
+        return GPIO.input(self.id)
+
+    # pylint: disable=no-method-argument
+    @atexit.register
+    def cleanup():
+        """Clean up pins"""
+        print("Exiting... \nCleaning up pins")
+        GPIO.cleanup()
+
+    # pylint: enable=no-method-argument
+
+
+# Cannot be used as GPIO
+SDA = Pin("GEN1_I2C_SDA")
+SCL = Pin("GEN1_I2C_SCL")
+SDA_1 = Pin("GEN2_I2C_SDA")
+SCL_1 = Pin("GEN2_I2C_SCL")
+
+# These pins are native to TX1
+BB03 = Pin("GPIO_X1_AUD")
+X02 = Pin("MOTION_INT")
+H07 = Pin("AP_WAKE_NFC")
+E04 = Pin("DMIC3_CLK")
+U03 = Pin("UART1_CTS")
+U02 = Pin("UART1_RTS")
+B03 = Pin("DAP1_SCLK")
+B00 = Pin("DAP1_FS")
+B01 = Pin("DAP1_DIN")
+B02 = Pin("DAP1_DOUT")
+P17 = Pin("GPIO_EXP_P17")
+E05 = Pin("DMIC3_DAT")
+X00 = Pin("MODEM_WAKE_AP")
+P16 = Pin("GPIO_EXP_P16")
+X03 = Pin("ALS_PROX_INT")
+
+# These pins are native to NANO
+S05 = Pin("CAM_AF_EN")
+Z00 = Pin("GPIO_PZ0")
+V00 = Pin("LCD_BL_PW")
+G03 = Pin("UART2_CTS")
+G02 = Pin("UART2_RTS")
+J07 = Pin("DAP4_SCLK")
+J04 = Pin("DAP4_FS")
+J05 = Pin("DAP4_DIN")
+J06 = Pin("DAP4_DOUT")
+Y02 = Pin("LCD_TE")
+DD00 = Pin("SPI2_CS1")
+B07 = Pin("SPI2_CS0")
+B05 = Pin("SPI2_MISO")
+B04 = Pin("SPI2_MOSI")
+B06 = Pin("SPI2_SCK")
+
+# These pins are shared across T210
+BB00 = Pin("AUD_MCLK")
+C04 = Pin("SPI1_CS1")
+C03 = Pin("SPI1_CS0")
+C01 = Pin("SPI1_MISO")
+C00 = Pin("SPI1_MOSI")
+C02 = Pin("SPI1_SCK")
+E06 = Pin("GPIO_PE6")
+
+i2cPorts = (
+    (0, SCL, SDA),
+    (1, SCL_1, SDA_1),
+)
+
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = ((0, C02, C00, C01), (1, B06, B04, B05))
+
+# SysFS pwm outputs, pwm channel and pin in first tuple
+pwmOuts = (
+    ((0, 0), V00),
+    ((0, 1), E06),
+)

lib/python3.11/site-packages/adafruit_blinka/microcontroller/tegra/t234/pin.py

@@ -0,0 +1,131 @@
+# SPDX-FileCopyrightText: 2022 Linh Hoang for NVIDIA
+# SPDX-FileCopyrightText: 2022 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+
+"""Tegra T234 pin names"""
+import atexit
+from Jetson import GPIO
+
+GPIO.setmode(GPIO.TEGRA_SOC)
+GPIO.setwarnings(False)  # shh!
+
+
+class Pin:
+    """Pins dont exist in CPython so...lets make our own!"""
+
+    IN = 0
+    OUT = 1
+    LOW = 0
+    HIGH = 1
+    PULL_NONE = 0
+    PULL_UP = 1
+    PULL_DOWN = 2
+
+    id = None
+    _value = LOW
+    _mode = IN
+
+    def __init__(self, bcm_number):
+        self.id = bcm_number
+
+    def __repr__(self):
+        return str(self.id)
+
+    def __eq__(self, other):
+        return self.id == other
+
+    def init(self, mode=IN, pull=None):
+        """Initialize the Pin"""
+        if mode is not None:
+            if mode == self.IN:
+                self._mode = self.IN
+                GPIO.setup(self.id, GPIO.IN)
+            elif mode == self.OUT:
+                self._mode = self.OUT
+                GPIO.setup(self.id, GPIO.OUT)
+            else:
+                raise RuntimeError("Invalid mode for pin: %s" % self.id)
+        if pull is not None:
+            if self._mode != self.IN:
+                raise RuntimeError("Cannot set pull resistor on output")
+            if pull == self.PULL_UP:
+                GPIO.setup(self.id, GPIO.IN, pull_up_down=GPIO.PUD_UP)
+            elif pull == self.PULL_DOWN:
+                GPIO.setup(self.id, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
+            else:
+                raise RuntimeError("Invalid pull for pin: %s" % self.id)
+
+    def value(self, val=None):
+        """Set or return the Pin Value"""
+        if val is not None:
+            if val == self.LOW:
+                self._value = val
+                GPIO.output(self.id, val)
+                return None
+            if val == self.HIGH:
+                self._value = val
+                GPIO.output(self.id, val)
+                return None
+            raise RuntimeError("Invalid value for pin")
+        return GPIO.input(self.id)
+
+    # pylint: disable=no-method-argument
+    @atexit.register
+    def cleanup():
+        """Clean up pins"""
+        print("Exiting... \nCleaning up pins")
+        GPIO.cleanup()
+
+    # pylint: enable=no-method-argument
+
+
+# Cannot be used as GPIO
+SDA = Pin("GP16_I2C8_DAT")  # I2C4
+SCL = Pin("GP81_I2C9_CLK")
+SDA_1 = Pin("GP14_I2C2_DAT")  # I2C2
+SCL_1 = Pin("GP13_I2C2_CLK")
+
+# Jetson AGX Orin
+Q06 = Pin("GP66")
+R04 = Pin("GP72_UART1_RTS_N")
+H07 = Pin("GP122")
+R00 = Pin("GP68")
+N01 = Pin("GP88_PWM1")
+BB00 = Pin("GP25")
+H00 = Pin("GP115")
+Z05 = Pin("GP49_SPI1_MOSI")
+Z04 = Pin("GP48_SPI1_MISO")
+P04 = Pin("GP56")
+Z03 = Pin("GP47_SPI1_CLK")
+Z06 = Pin("GP50_SPI1_CS0_N")
+Z07 = Pin("GP51_SPI1_CS1_N")
+AA01 = Pin("GP18_CAN0_DIN")
+AA00 = Pin("GP17_CAN0_DOUT")
+BB01 = Pin("GP26")
+AA02 = Pin("GP19_CAN1_DOUT")
+I02 = Pin("GP125")
+R05 = Pin("GP73_UART1_CTS_N")
+AA03 = Pin("GP20_CAN1_DIN")
+I01 = Pin("GP124")
+I00 = Pin("GP123")
+
+
+AC06 = Pin("GP167")
+Y00 = Pin("SPI1_SCK")
+N01 = Pin("GP88_PWM1")
+Y04 = Pin("GP40_SPI3_CS1_N")
+Y03 = Pin("GP39_SPI3_CS0_N")
+Y01 = Pin("GP37_SPI3_MISO")
+Q05 = Pin("GP65")
+G06 = Pin("GP113_PWM7")
+Y02 = Pin("GP38_SPI3_MOSI")
+
+
+i2cPorts = (
+    (7, SCL, SDA),
+    (1, SCL_1, SDA_1),
+)
+
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = ((0, Z03, Z05, Z04),)