MikrofonSensor und TemperaturSenor die zwei Python programme funktionieren. mit den jeweiligen 2 json Datein. Beim TemperaturSensor wird im Terminal keine Wertre ausgegeben aber in der json Datei kann man die Temp und Hum sehen.

lib/python3.11/site-packages/adafruit_blinka/microcontroller/pentium/j4105/pin.py

@@ -0,0 +1,59 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Intel Celeron j4105 pin names"""
+
+from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
+
+GPIO388 = Pin((1, 36))
+GPIO389 = Pin((1, 37))
+GPIO386 = Pin((1, 34))
+GPIO387 = Pin((1, 35))
+GPIO337 = Pin((2, 5))
+GPIO415 = Pin((1, 63))
+GPIO416 = Pin((1, 64))
+GPIO357 = Pin((1, 5))
+GPIO356 = Pin((1, 4))
+GPIO358 = Pin((1, 6))
+GPIO359 = Pin((1, 7))
+GPIO355 = Pin((1, 3))
+GPIO391 = Pin((1, 39))
+GPIO417 = Pin((1, 65))
+GPIO493 = Pin((0, 61))
+GPIO492 = Pin((0, 60))
+GPIO410 = Pin((1, 58))
+GPIO364 = Pin((1, 12))
+GPIO338 = Pin((2, 6))
+GPIO339 = Pin((2, 7))
+GPIO340 = Pin((2, 8))
+GPIO341 = Pin((2, 9))
+GPIO413 = Pin((1, 61))
+GPIO421 = Pin((1, 69))
+GPIO422 = Pin((1, 70))
+GPIO390 = Pin((1, 38))
+GPIO419 = Pin((1, 67))
+GPIO412 = Pin((1, 60))
+
+SPI1_SCLK = GPIO355
+SPI1_MOSI = GPIO359
+SPI1_MISO = GPIO358
+SPI1_FSO = GPIO356
+SPI1_FS1 = GPIO357
+
+UART4_TX = GPIO493
+UART4_RX = GPIO492
+
+I2C2_SDA = GPIO386
+I2C2_SCL = GPIO387
+
+I2C3_SDA = GPIO388
+I2C3_SCL = GPIO389
+
+i2cPorts = (
+    (2, I2C2_SCL, I2C2_SDA),
+    (3, I2C3_SCL, I2C3_SDA),
+)
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = ((1, SPI1_SCLK, SPI1_MOSI, SPI1_MISO),)
+# ordered as uartId, txId, rxId
+uartPorts = ((4, UART4_TX, UART4_RX),)

lib/python3.11/site-packages/adafruit_blinka/microcontroller/pentium/n3710/pin.py

@@ -0,0 +1,89 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Pentium N3710 (Braswell core SOC) pin names
+   i2c and GPIO can be accessed through Blinka.
+   For i2c use IC20_SCL, IC20-SDA and IC21-SCL, IC21-SDA in the i2c(<sdl, sda>) calls.
+   For UART use pyserial"""
+from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
+
+# gpiochip3
+GPIO_243 = Pin((3, 15))
+GPIO_246 = Pin((3, 18))
+GPIO_247 = Pin((3, 19))
+GPIO_249 = Pin((3, 21))
+GPIO_250 = Pin((3, 22))
+GPIO_253 = Pin((3, 25))
+GPIO_273 = Pin((3, 45))
+GPIO_275 = Pin((3, 47))
+GPIO_276 = Pin((3, 48))
+GPIO_278 = Pin((3, 50))
+GPIO_279 = Pin((3, 51))
+GPIO_280 = Pin((3, 52))
+GPIO_307 = Pin((3, 79))
+
+SDIO_D3 = SDMMC2_D3 = GPIO_243
+SDIO_DI = SDMMC2_D1 = GPIO_246
+SDIO_CLK = SDMMC2_CLK = GPIO_247
+SDIO_D2 = SDMMC2_D2 = GPIO_249
+SDIO_CMD = SDMMC2_CMD = GPIO_250
+SDIO_D0 = SDMMC2_D0 = GPIO_253
+
+MF_LPC_AD2 = GPIO_273
+MF_LPC_AD0 = GPIO_275
+LPC_FRAMEB = GPIO_276
+MF_LPC_AD3 = GPIO_278
+MF_LPC_CLKOUT0 = GPIO_279
+MF_LPC_AD1 = GPIO_280
+ILB_SERIRQ = GPIO_307
+
+# ggpiochip1
+GPIO_358 = Pin((1, 17))
+GPIO_SUS3 = SDIO_WAKE = GPIO_358
+
+
+# gpiochip0
+GPIO_490 = Pin((0, 76))
+GPIO_492 = Pin((0, 78))
+
+SATA_GP1 = TS_INT = GPIO_490
+SATA_GP2 = TS_RST = GPIO_492
+
+
+# not general gpio on chip 0
+# use pyserial not blinka.  These are only included for completeness
+
+UART1_RXD = Pin((0, 16))
+UART1_TXD = Pin((0, 20))
+UART1_RTS = Pin((0, 15))
+UART1_CTS = Pin((0, 18))
+
+UART2_RXD = Pin((0, 17))
+UART2_TXD = Pin((0, 21))
+UART2_RTS = Pin((0, 19))
+UART2_CTS = Pin((0, 22))
+
+GPIO_429 = UART1_RTS
+GPIO_430 = UART1_RXD
+GPIO_431 = UART2_RXD
+GPIO_432 = UART1_CTS
+GPIO_434 = UART1_TXD
+GPIO_435 = UART2_TXD
+GPIO_436 = UART2_CTS
+
+# i2c use these addresses when accessing i2c from Blinka.  You can also access
+# the i2c useing smbus
+I2C0_SDA = Pin((0, 61))  # IC21 on diagram, port 0 in hardware manual
+I2C0_SCL = Pin((0, 65))
+
+I2C1_SDA = TS_I2C_SDA = Pin((0, 45))  # I2C2 on diagram, port 5 in hardware manual
+I2C1_SCL = TS_I2C_SCL = Pin((0, 48))
+
+
+GPIO_469 = I2C1_SDA  # I2C2 on diagram
+GPIO_472 = I2C1_SCL
+GPIO_475 = I2C0_SDA  # I2C1 on diagram
+GPIO_479 = I2C0_SCL
+
+# ordered as i2cId, sclId, sdaId
+i2cPorts = ((0, I2C0_SCL, I2C0_SDA), (1, I2C1_SCL, I2C1_SDA))