MikrofonSensor und TemperaturSenor die zwei Python programme funktionieren. mit den jeweiligen 2 json Datein. Beim TemperaturSensor wird im Terminal keine Wertre ausgegeben aber in der json Datei kann man die Temp und Hum sehen.

lib/python3.11/site-packages/adafruit_blinka/microcontroller/mips24kec/pin.py

@@ -0,0 +1,69 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""MIPS 24kec pin names"""
+from adafruit_blinka.microcontroller.generic_linux.periphery_pin import Pin
+
+GPIO0 = Pin(0)
+GPIO1 = Pin(1)
+GPIO2 = Pin(2)
+GPIO3 = Pin(3)
+GPIO4 = Pin(4)  # I2C SDA
+GPIO5 = Pin(5)  # I2C SCL
+GPIO6 = Pin(6)  # SPI CS
+GPIO7 = Pin(7)  # SPI SCLK
+GPIO8 = Pin(8)  # SPI MOSI
+GPIO9 = Pin(9)  # SPI MISO
+GPIO10 = Pin(10)
+
+GPIO11 = Pin(11)
+GPIO12 = Pin(12)
+GPIO13 = Pin(13)
+GPIO14 = Pin(14)
+GPIO15 = Pin(15)
+GPIO16 = Pin(16)
+GPIO17 = Pin(17)
+
+GPIO18 = Pin(18)
+GPIO19 = Pin(19)
+
+GPIO20 = Pin(20)
+GPIO21 = Pin(21)
+GPIO22 = Pin(22)
+GPIO23 = Pin(23)
+
+GPIO37 = Pin((1, 5))
+GPIO38 = Pin((1, 6))
+GPIO43 = Pin((1, 11))
+GPIO44 = Pin((1, 12))
+GPIO45 = Pin((1, 13))
+GPIO46 = Pin((1, 14))
+
+UART0_TX = GPIO12
+UART0_RX = GPIO13
+
+UART1_TX = GPIO45
+UART1_RX = GPIO46
+
+UART2_TX = GPIO20
+UART2_RX = GPIO21
+
+SPI0_MOSI = GPIO8
+SPI0_MISO = GPIO9
+SPI0_SCLK = GPIO7
+SPI0_CS = GPIO6
+
+I2C0_SDA = GPIO4
+I2C0_SCL = GPIO5
+
+# ordered as i2cId, sclId, sdaId
+i2cPorts = ((0, I2C0_SCL, I2C0_SDA),)
+
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = (((0, 1), SPI0_SCLK, SPI0_MOSI, SPI0_MISO),)
+
+# ordered as uartId, txId, rxId
+uartPorts = (
+    (0, UART0_TX, UART0_RX),
+    (1, UART1_TX, UART1_RX),
+)