MikrofonSensor und TemperaturSenor die zwei Python programme funktionieren. mit den jeweiligen 2 json Datein. Beim TemperaturSensor wird im Terminal keine Wertre ausgegeben aber in der json Datei kann man die Temp und Hum sehen.

lib/python3.11/site-packages/adafruit_blinka/microcontroller/amlogic/s905x/pin.py

@@ -0,0 +1,75 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""AmLogic s905x pin names"""
+# pylint: disable=wildcard-import,unused-wildcard-import
+from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
+
+# Chip 0
+GPIO100 = Pin((0, 0))
+GPIO101 = Pin((0, 1))
+GPIO104 = Pin((0, 4))
+GPIO105 = Pin((0, 5))
+GPIO106 = Pin((0, 6))
+GPIO109 = Pin((0, 9))
+GPIO110 = Pin((0, 10))
+
+# Chip 1
+GPIO220 = Pin((1, 20))
+GPIO222 = Pin((1, 22))
+GPIO223 = Pin((1, 23))
+GPIO224 = Pin((1, 24))
+GPIO225 = Pin((1, 25))
+GPIO275 = Pin((1, 75))
+GPIO276 = Pin((1, 76))
+GPIO279 = Pin((1, 79))
+GPIO280 = Pin((1, 80))
+GPIO281 = Pin((1, 81))
+GPIO282 = Pin((1, 82))
+GPIO283 = Pin((1, 83))
+GPIO284 = Pin((1, 84))
+GPIO285 = Pin((1, 85))
+GPIO286 = Pin((1, 86))
+GPIO287 = Pin((1, 87))
+GPIO288 = Pin((1, 88))
+GPIO289 = Pin((1, 89))
+GPIO290 = Pin((1, 90))
+GPIO291 = Pin((1, 91))
+GPIO292 = Pin((1, 92))
+GPIO293 = Pin((1, 93))
+GPIO294 = Pin((1, 94))
+GPIO295 = Pin((1, 95))
+GPIO296 = Pin((1, 96))
+GPIO297 = Pin((1, 97))
+GPIO298 = Pin((1, 98))
+
+I2C0_SDA = GPIO105
+I2C0_SCK = GPIO104
+I2C1_SDA = GPIO275
+I2C1_SCK = GPIO276
+
+UART1_RX = GPIO288
+UART1_TX = GPIO287
+UART2_RX = GPIO292
+UART2_TX = GPIO291
+
+SPI0_SCLK = GPIO290
+SPI0_MISO = GPIO288
+SPI0_MOSI = GPIO287
+SPI0_CS = GPIO289
+SPI1_SCLK = GPIO223
+SPI1_MISO = GPIO288
+SPI1_MOSI = GPIO287
+SPI1_CS = GPIO289
+
+i2cPorts = (
+    (0, I2C0_SCK, I2C0_SDA),
+    (1, I2C1_SCK, I2C1_SDA),
+)
+
+spiPorts = ((0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO), (1, SPI1_SCLK, SPI1_MOSI, SPI1_MISO))
+
+uartPorts = (
+    (1, UART1_TX, UART1_RX),
+    (2, UART2_TX, UART2_RX),
+)