MikrofonSensor und TemperaturSenor die zwei Python programme funktionieren. mit den jeweiligen 2 json Datein. Beim TemperaturSensor wird im Terminal keine Wertre ausgegeben aber in der json Datei kann man die Temp und Hum sehen.

lib/python3.11/site-packages/adafruit_blinka/microcontroller/amlogic/s905/pin.py

@@ -0,0 +1,93 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""AmLogic s905 pin names"""
+from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
+
+GPIO122 = Pin((0, 0))
+GPIO123 = Pin((0, 1))
+GPIO124 = Pin((0, 2))
+GPIO125 = Pin((0, 3))
+GPIO126 = Pin((0, 4))
+GPIO127 = Pin((0, 5))
+GPIO128 = Pin((0, 6))
+GPIO129 = Pin((0, 7))
+GPIO130 = Pin((0, 8))
+GPIO131 = Pin((0, 9))
+GPIO132 = Pin((0, 10))
+GPIO133 = Pin((0, 11))
+GPIO134 = Pin((0, 12))
+GPIO135 = Pin((0, 13))
+
+GPIO205 = Pin((1, 69))
+GPIO206 = Pin((1, 70))
+GPIO207 = Pin((1, 71))
+GPIO208 = Pin((1, 72))
+GPIO209 = Pin((1, 73))
+GPIO210 = Pin((1, 74))
+
+GPIO211 = Pin((1, 75))
+GPIO212 = Pin((1, 76))
+GPIO213 = Pin((1, 77))
+GPIO214 = Pin((1, 78))
+GPIO215 = Pin((1, 79))
+GPIO216 = Pin((1, 80))
+GPIO217 = Pin((1, 81))
+GPIO218 = Pin((1, 82))
+GPIO219 = Pin((1, 83))
+GPIO220 = Pin((1, 84))
+GPIO221 = Pin((1, 85))
+GPIO222 = Pin((1, 86))
+GPIO223 = Pin((1, 87))
+GPIO224 = Pin((1, 88))
+GPIO225 = Pin((1, 89))
+GPIO226 = Pin((1, 90))
+GPIO227 = Pin((1, 91))
+
+GPIO228 = Pin((1, 92))
+GPIO229 = Pin((1, 93))
+GPIO230 = Pin((1, 94))
+GPIO231 = Pin((1, 95))
+GPIO232 = Pin((1, 96))
+GPIO233 = Pin((1, 97))
+GPIO234 = Pin((1, 98))
+GPIO235 = Pin((1, 99))
+GPIO236 = Pin((1, 100))
+GPIO237 = Pin((1, 101))
+GPIO238 = Pin((1, 102))
+GPIO239 = Pin((1, 103))
+GPIO240 = Pin((1, 104))
+GPIO241 = Pin((1, 105))
+GPIO242 = Pin((1, 106))
+GPIO243 = Pin((1, 107))
+GPIO247 = Pin((1, 111))
+GPIO248 = Pin((1, 112))
+GPIO249 = Pin((1, 113))
+
+I2C0_SDA = GPIO205
+I2C0_SCL = GPIO206
+I2C1_SDA = GPIO207
+I2C1_SCL = GPIO208
+I2C2_SDA = GPIO209
+I2C2_SCL = GPIO210
+
+UART1_TX = GPIO240
+UART1_RX = GPIO241
+UART2_TX = GPIO205
+UART2_RX = GPIO206
+
+SPI0_SCLK = GPIO230
+SPI0_MISO = GPIO232
+SPI0_MOSI = GPIO235
+
+i2cPorts = (
+    (0, I2C0_SCL, I2C0_SDA),
+    (1, I2C1_SCL, I2C1_SDA),
+)
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = ((0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO),)
+# ordered as uartId, txId, rxId
+uartPorts = (
+    (1, UART1_TX, UART1_RX),
+    (2, UART2_TX, UART2_RX),
+)