MikrofonSensor und TemperaturSenor die zwei Python programme funktionieren. mit den jeweiligen 2 json Datein. Beim TemperaturSensor wird im Terminal keine Wertre ausgegeben aber in der json Datei kann man die Temp und Hum sehen.

lib/python3.11/site-packages/adafruit_blinka/microcontroller/allwinner/h3/__init__.py

@@ -0,0 +1,4 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Definition for the AllWinner H3 chip"""

lib/python3.11/site-packages/adafruit_blinka/microcontroller/allwinner/h3/pin.py

@@ -0,0 +1,71 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Allwinner H3 pin names"""
+from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
+
+PA0 = Pin(0)
+UART2_TX = PA0
+PA1 = Pin(1)
+UART2_RX = PA1
+PA2 = Pin(2)
+PA3 = Pin(3)
+PA6 = Pin(6)
+PA7 = Pin(7)
+PA8 = Pin(8)
+PA9 = Pin(9)
+PA10 = Pin(10)
+PA11 = Pin(11)
+TWI0_SCL = PA11
+PA12 = Pin(12)
+TWI0_SDA = PA12
+PA13 = Pin(13)
+UART3_TX = PA13
+PA14 = Pin(14)
+UART3_RX = PA14
+SPI1_SCLK = PA14
+PA15 = Pin(15)
+SPI1_MOSI = PA15
+PA16 = Pin(16)
+SPI1_MISO = PA16
+PA17 = Pin(17)
+PA18 = Pin(18)
+PA19 = Pin(19)
+PA20 = Pin(20)
+PA21 = Pin(21)
+
+PC0 = Pin(64)
+SPI0_MOSI = PC0
+PC1 = Pin(65)
+SPI0_MISO = PC1
+PC2 = Pin(66)
+SPI0_SCLK = PC2
+PC3 = Pin(67)
+SPI0_CS = PC3
+PC4 = Pin(68)
+PC7 = Pin(71)
+
+PD14 = Pin(110)
+
+PG6 = Pin(198)
+UART1_TX = PG6
+PG7 = Pin(199)
+UART1_RX = PG7
+PG8 = Pin(200)
+PG9 = Pin(201)
+PG10 = Pin(202)
+PG11 = Pin(203)
+PG12 = Pin(204)
+PG13 = Pin(205)
+
+PL2 = Pin((1, 2))
+PL4 = Pin((1, 4))
+
+i2cPorts = ((0, TWI0_SCL, TWI0_SDA),)
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = (
+    (0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO),
+    (1, SPI1_SCLK, SPI1_MOSI, SPI1_MISO),
+)
+# ordered as uartId, txId, rxId
+uartPorts = ((3, UART3_TX, UART3_RX),)