MikrofonSensor und TemperaturSenor die zwei Python programme funktionieren. mit den jeweiligen 2 json Datein. Beim TemperaturSensor wird im Terminal keine Wertre ausgegeben aber in der json Datei kann man die Temp und Hum sehen.

lib/python3.11/site-packages/adafruit_blinka/microcontroller/allwinner/a64/__init__.py

@@ -0,0 +1,4 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Definition for the AllWinner A64 chip"""

lib/python3.11/site-packages/adafruit_blinka/microcontroller/allwinner/a64/pin.py

@@ -0,0 +1,91 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Allwinner A64 pin names"""
+from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
+
+PB0 = Pin((1, 32))
+UART2_TX = PB0
+PB1 = Pin((1, 33))
+UART2_RX = PB1
+PB2 = Pin((1, 34))
+PB3 = Pin((1, 35))
+PB4 = Pin((1, 36))
+PB5 = Pin((1, 37))
+PB6 = Pin((1, 38))
+PB7 = Pin((1, 39))
+
+PC0 = Pin((1, 64))
+SPI0_MOSI = PC0
+PC1 = Pin((1, 65))
+SPI0_MISO = PC1
+PC2 = Pin((1, 66))
+SPI0_SCLK = PC2
+PC3 = Pin((1, 67))
+SPI0_CS = PC3
+PC4 = Pin((1, 68))
+PC5 = Pin((1, 69))
+PC6 = Pin((1, 70))
+PC7 = Pin((1, 71))
+PC8 = Pin((1, 72))
+PC9 = Pin((1, 73))
+PC10 = Pin((1, 74))
+PC11 = Pin((1, 75))
+PC12 = Pin((1, 76))
+PC13 = Pin((1, 77))
+PC14 = Pin((1, 78))
+PC15 = Pin((1, 79))
+PC16 = Pin((1, 80))
+
+PD0 = Pin((1, 96))
+UART3_TX = PD0
+SPI1_CS = PD0
+PD1 = Pin((1, 97))
+SPI1_SCLK = PD1
+UART3_RX = PD1
+PD2 = Pin((1, 98))
+UART4_TX = PD2
+SPI1_MOSI = PD2
+PD3 = Pin((1, 99))
+UART4_RX = PD3
+SPI1_MISO = PD3
+PD4 = Pin((1, 100))
+PD5 = Pin((1, 101))
+PD6 = Pin((1, 102))
+
+PE14 = Pin((1, 142))
+TWI2_SCL = PE14
+PE15 = Pin((1, 143))
+TWI2_SDA = PE15
+
+PH2 = Pin((1, 226))
+TWI1_SCL = PH2
+PH3 = Pin((1, 227))
+TWI1_SDA = PH3
+PH4 = Pin((1, 228))
+PH5 = Pin((1, 229))
+PH6 = Pin((1, 230))
+PH7 = Pin((1, 231))
+PH8 = Pin((1, 232))
+PH9 = Pin((1, 233))
+
+PL2 = Pin((0, 2))
+PL3 = Pin((0, 3))
+PL8 = Pin((0, 8))
+PL9 = Pin((0, 9))
+PL10 = Pin((0, 10))
+
+# ordered as i2cId, sclId, sdaId
+i2cPorts = ((1, TWI1_SCL, TWI1_SDA), (2, TWI2_SCL, TWI2_SDA))
+
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = (
+    (0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO),
+    (1, SPI1_SCLK, SPI1_MOSI, SPI1_MISO),
+)
+# ordered as uartId, txId, rxId
+uartPorts = (
+    (2, UART2_TX, UART2_RX),
+    (3, UART3_TX, UART3_RX),
+    (4, UART4_TX, UART4_RX),
+)