MikrofonSensor und TemperaturSenor die zwei Python programme funktionieren. mit den jeweiligen 2 json Datein. Beim TemperaturSensor wird im Terminal keine Wertre ausgegeben aber in der json Datei kann man die Temp und Hum sehen.

lib/python3.11/site-packages/adafruit_blinka/microcontroller/allwinner/a33/__init__.py

@@ -0,0 +1,4 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Definition for the AllWinner A33 chip"""

lib/python3.11/site-packages/adafruit_blinka/microcontroller/allwinner/a33/pin.py

@@ -0,0 +1,50 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Allwinner A33 pin names"""
+
+from adafruit_blinka.microcontroller.generic_linux.libgpiod_pin import Pin
+
+PB0 = Pin(32)  # PB0/UART2_TX/UART0_TX/PB_EINT0
+UART2_TX = PB0
+PB1 = Pin(33)  # PB1/UART2_RX/UART0_RX/PB_EINT1
+UART2_RX = PB1
+
+PC0 = Pin(64)  # PC0/ND_WE/SPI0_MOSI
+PC1 = Pin(65)  # PC1/ND_ALE/SPI0_MISO
+PC2 = Pin(66)  # PC2/ND_CLE/SPI0_CLK
+
+PH4 = Pin(228)  # PH4/TWI1_SCK
+TWI1_SCL = PH4
+PH5 = Pin(229)  # PH5/TWI1_SDA
+TWI1_SDA = PH5
+
+
+PH6 = Pin(230)  # PH6/SPI0_CS/UART3_TX
+UART3_TX = PH6
+SPI0_CS = PH6
+
+PH7 = Pin(231)  # PH7/SPI0_CLK/UART3_RX
+UART3_RX = PH7
+SPI0_SCLK = PH7
+
+PH8 = Pin(232)  # PH8/SPI0_MOSI/UART3_RTS
+UART3_RTS = PH8
+SPI0_MOSI = PH8
+
+PH9 = Pin(233)  # PH9/SPI0_MISO/UART3_CTS
+UART3_CTS = PH9
+SPI0_MISO = PH9
+
+
+# ordered as i2cId, sclId, sdaId
+i2cPorts = ((0, TWI1_SCL, TWI1_SDA),)
+
+# ordered as spiId, sckId, mosiId, misoId
+spiPorts = ((0, SPI0_SCLK, SPI0_MOSI, SPI0_MISO),)
+
+# ordered as uartId, txId, rxId
+uartPorts = (
+    (2, UART2_TX, UART2_RX),
+    (3, UART3_TX, UART3_RX),
+)