MikrofonSensor und TemperaturSenor die zwei Python programme funktionieren. mit den jeweiligen 2 json Datein. Beim TemperaturSensor wird im Terminal keine Wertre ausgegeben aber in der json Datei kann man die Temp und Hum sehen.

lib/python3.11/site-packages/adafruit_blinka/board/macropad_u2if.py

@@ -0,0 +1,61 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""
+Pin definitions for the MacroPad RP2040 with u2if firmware.
+
+Adafruit CircuitPython 6.2.0 on 2021-04-05; Adafruit MacroPad RP2040 with rp2040
+>>> import board
+>>> board.
+KEY1            KEY2            KEY3            KEY4
+KEY5            KEY6            KEY7            KEY8
+KEY9            KEY10           KEY11           KEY12
+LED             SPEAKER_ENABLE  SPEAKER         ENCODER_SWITCH
+BUTTON          ENCODER_A       ROTA            ENCODER_B
+ROTB            NEOPIXEL        SDA             SCL
+OLED_CS         OLED_RESET      OLED_DC         SCLK
+SCK             MOSI            MISO            I2C
+SPI             UART
+"""
+
+from adafruit_blinka.microcontroller.rp2040_u2if import pin
+
+KEY1 = pin.GP1
+KEY2 = pin.GP2
+KEY3 = pin.GP3
+KEY4 = pin.GP4
+KEY5 = pin.GP5
+KEY6 = pin.GP6
+KEY7 = pin.GP7
+KEY8 = pin.GP8
+KEY9 = pin.GP9
+KEY10 = pin.GP10
+KEY11 = pin.GP11
+KEY12 = pin.GP12
+
+LED = pin.GP13
+
+SPEAKER_ENABLE = pin.GP4
+SPEAKER = pin.GP16
+
+ENCODER_SWITCH = BUTTON = pin.GP0
+
+ENCODER_A = ROTA = pin.GP17
+ENCODER_B = ROTB = pin.GP18
+
+NEOPIXEL = pin.GP19
+
+SDA = pin.GP20
+SCL = pin.GP21
+
+OLED_CS = pin.GP22
+OLED_RESET = pin.GP23
+OLED_DC = pin.GP24
+
+SCLK = SCK = pin.GP26
+MOSI = pin.GP27
+MISO = pin.GP28
+
+# access u2if via pin instance to open for specifc VID/PID
+# pylint:disable = protected-access
+pin.GP0._u2if_open_hid(0x239A, 0x0107)