MikrofonSensor und TemperaturSenor die zwei Python programme funktionieren. mit den jeweiligen 2 json Datein. Beim TemperaturSensor wird im Terminal keine Wertre ausgegeben aber in der json Datei kann man die Temp und Hum sehen.

lib/python3.11/site-packages/adafruit_blinka/board/luckfox/luckfoxpico_mini.py

@@ -0,0 +1,62 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Pin definitions for the Lockfox Pico Mini."""
+
+from adafruit_blinka.microcontroller.rockchip.rv1103 import pin
+
+G42 = pin.GPIO1_B2
+G43 = pin.GPIO1_B3
+G48 = pin.GPIO1_C0  # This port is in use as CS0. This port is not available.
+G49 = pin.GPIO1_C1
+G50 = pin.GPIO1_C2
+G51 = pin.GPIO1_C3
+G52 = pin.GPIO1_C4
+G53 = pin.GPIO1_C5
+G56 = pin.GPIO1_D0
+G57 = pin.GPIO1_D1
+G58 = pin.GPIO1_D2
+G59 = pin.GPIO1_D3
+G54 = pin.GPIO1_C6
+G55 = pin.GPIO1_C7
+G4 = pin.GPIO0_A4
+
+# UART
+UART3_TX = pin.UART3_TX_M1
+UART3_RX = pin.UART3_RX_M1
+UART4_TX = pin.UART4_TX_M1
+UART4_RX = pin.UART4_RX_M1
+
+# Default UART
+TX = UART3_TX
+RX = UART3_RX
+TXD = UART3_TX
+RXD = UART3_RX
+
+# I2C
+I2C3_SCL = pin.I2C3_SCL_M1
+I2C3_SDA = pin.I2C3_SDA_M1
+
+# Default I2C
+SCL = I2C3_SCL
+SDA = I2C3_SDA
+
+# SPI
+SPI0_MISO = pin.SPI0_MISO_M0
+SPI0_MOSI = pin.SPI0_MOSI_M0
+SPI0_SCLK = pin.SPI0_CLK_M0
+SPI0_CS0 = pin.SPI0_CS0_M0
+SPI0_CS1 = pin.SPI0_CS1_M0
+
+# Default SPI
+MISO = SPI0_MISO
+MOSI = SPI0_MOSI
+SCLK = SPI0_SCLK
+
+# PWM
+PWM10 = pin.PWM10
+PWM11 = pin.PWM11
+
+# ADC
+ADC_IN0 = pin.ADC_IN0
+ADC_IN1 = pin.ADC_IN1