MikrofonSensor und TemperaturSenor die zwei Python programme funktionieren. mit den jeweiligen 2 json Datein. Beim TemperaturSensor wird im Terminal keine Wertre ausgegeben aber in der json Datei kann man die Temp und Hum sehen.

lib/python3.11/site-packages/adafruit_blinka/board/lubancat/lubancat_stm32mp157.py

@@ -0,0 +1,52 @@
+# SPDX-FileCopyrightText: 2021 Melissa LeBlanc-Williams for Adafruit Industries
+#
+# SPDX-License-Identifier: MIT
+"""Pin definitions for the LubanCat STM32MP157."""
+
+from adafruit_blinka.microcontroller.stm32.stm32mp157 import pin
+
+# Pro board pin header J1 named GPIO_PAx, pin header J2 named GPIO_PBx
+
+# Board pin name [= alias] = RPI name [= alias] = pin name
+
+# connector J1
+GPIO_PA3 = USART1_CTS = PZ3 = pin.PZ3
+GPIO_PA4 = USART1_RTS = PZ5 = pin.PZ5
+GPIO_PA5 = USART1_TX = PZ7 = pin.PZ7
+GPIO_PA6 = USART1_RX = PZ6 = pin.PZ6
+GPIO_PA7 = USART3_TX = PB10 = pin.PB10
+GPIO_PA8 = USART3_RX = PB12 = pin.PB12
+GPIO_PA11 = FDCAN1_TX = PA12 = pin.PA12
+GPIO_PA12 = FDCAN1_RX = PA11 = pin.PA11
+# connector J2
+GPIO_PB7 = UART4_TX = PG11 = pin.PG11
+GPIO_PB8 = UART4_RX = PB2 = pin.PB2
+GPIO_PB11 = QSPI_IO0 = PF8 = pin.PF8
+GPIO_PB12 = QSPI_IO1 = PF9 = pin.PF9
+GPIO_PB13 = QSPI_IO2 = PF7 = pin.PF7
+GPIO_PB14 = QSPI_IO3 = PF6 = pin.PF6
+GPIO_PB15 = QSPI_CLK = PF10 = pin.PF10
+GPIO_PB16 = QSPI_NCS = PB6 = pin.PB6
+
+# general gpio as LED、KEY function
+# LED
+LED_RED = PA13 = pin.PA13
+LED_GREEN = PB5 = pin.PG2
+LED_BLUE = PB5 = pin.PB5
+# KEY
+KEY1 = PB13 = pin.PB13
+KEY2 = PH7 = pin.PH7
+# BEEP
+BEEP = PC13 = pin.PC13
+
+# general gpio as I2C function
+# I2C1
+GPIO_PA13 = I2C1_SCL = SCL1 = SCL = pin.PF14
+GPIO_PA14 = I2C1_SDA = SDA1 = SDA = pin.PF15
+# I2C2
+GPIO_PA15 = I2C2_SCL = SCL2 = pin.PZ0
+GPIO_PA16 = I2C2_SDA = SDA2 = pin.PZ1
+
+# general gpio as analog input function
+GPIO_PB3 = ADC_IN0 = ANA0 = A0 = pin.PAN0
+GPIO_PB4 = ADC_IN1 = ANA1 = A1 = pin.PAN1